Main Menu¶
The Menu items in the Main Menu are [File], [Edit], [Diagram], [Alignment], [View], [Tools], [Window] and [Help]. Each Menu item is briefly explained below.
File¶
[File] is used for general Input-Output functions.
New [Ctrl+N]¶
Create a new Project.
Open¶
Open an existing Project.
Save [Ctrl+S]¶
Save a Project. When saving a project for the first time, its name will be the first diagram’s or table’s name.
Save As¶
Save a Project with a different name.
Close¶
Close a Project.
Print Setup (Project)¶
Set up printing options for the Project.
Print Setup (Diagram)¶
Set up printing option for the current diagram or table.
Print Preview¶
View the print preview of the diagram or table displayed in the Diagram Editor.
Print [Ctrl+P]¶
Print the diagram or table displayed in the Diagram Editor.
Preview Multi¶
View the print preview of multiple diagrams and tables at the same time.
Print Multi¶
Print multiple diagrams and tables at the same time.
Exit [Ctrl+Q]¶
Exit STAMP Workbench .
Recently used Projects¶
The 5 most recently used Projects are listed.
Edit¶
[Edit] is used to edit Models.
Undo [Ctrl+Z]¶
Undo the most recent edit.
Redo [Ctrl+Y]¶
Undo the most recent [Undo] action.
Copy to Clipboard¶
Data can be copied to the clipboard in one of these formats, BMP, PNG and Extended Meta File (EMF).
BMP, PNG [Ctrl+Alt+C]
Copy the selected Diagram Elements to the Clipboard in a graphic format.EMF [Ctrl+Shift+C]
Copy the selected Diagram Elements to the Clipboard in Extended Meta File (EMF) format.
Delete[Ctrl+D]¶
Delete the Diagram Elements selected in the diagram editor.
Line Style¶
Line [Ctrl+W]
Using [Line], Diagram Elements are connected with straight or polygonal lines.Line (Right Angle) [Ctrl+E]
Using [Line (Right Angle)], Diagram Elements are connected with right-angle lines.Curve
Using [Curve], Diagram Elements are connected with curve lines.Curve (Right Angle)
Using [Curve (Right Angle)], Diagram Elements are connected with right-angle curve lines.
Set Color¶
Set the color of the selected Diagram Elements in the Diagram Editor.
Set Line Color¶
Set the color of the selected lines in the Diagram Editor.
Set Font Color¶
Set the color of the font in the selected Diagram Elements.
Select All [Ctrl+A]¶
Select all Diagram Elements in current Diagram.
Depth Arrangement¶
Change the order of the overlapped Diagram Elements in the Diagram Editor.
Bring to Front
Move the selected Diagram Element to the top.Bring Forward
Move the selected Diagram Element one step closer to the front.Send Backward
Move the selected Diagram Element one step back.Send to Back
Send the selected Diagram Element to the back of all the Diagram Elements.
Diagram¶
Control Structure Diagram¶
Add a Control Structure Diagram.
Control Loop Diagram¶
Add a Control Loop Diagram.
Control Loop Diagrms can be created if a Link or Control Action is selected in the Control Structure Diagram.
Component Extracting Table¶
Add a Component Extracting Table.
If Components exist in the project, they are displayed in the table.
Precondition Table¶
Add a Precondition Table.
Accident Hazard Safety Constrain Table¶
Add an Accident Hazard Safety Constraint Table.
UCA Table¶
Add a UCA Table.
To create a UCA Table, at least one Control Structure Diagram need to exist in the project.
If there are more than one Control Structure Diagrams in the projet, select this menu after opening the target diagram or selecting it on the Strucructure Tree.
HCF Table¶
Add an HCF Table.
HCF tables can be created after creating UCAs in UCA tables.
Countermeasure Table¶
Add a Countermeasure Table.
HCFs created in HCF tables are displayed.
Alignment¶
[Alignment] is used to align the selected Diagram Elements in the Diagram Editor or adjust its size.
Align Horizontally¶
This aligns multiple Diagram Elements horizontally in the Diagram Editor.
Align Top [Ctrl+Alt+Up]
Align the selected Diagram Elements with the top end of the highest Diagram Element.Align Horizontal Center [Ctrl+Alt+Minus(-)]
Align the Diagram Elements along the midpoint between the highest and lowest Diagram ElementsAlign Bottom [Ctrl+Alt+Down]
Align the selected Diagram Elements with the bottom end of the lowest Diagram Element.Align Horizontal Even
Horizontally align the Diagram Elements with even spacing.
Align Vertically¶
This aligns multiple Diagram Elements vertically in the Diagram Editor.
Align Left [Ctrl+Alt+Left]
Align Diagram Elements with the left side of the leftmost Diagram Element.Align Vertical Center [Ctrl+Ctrl+I]
Align Diagram Elements along the midpoint between the leftmost and rightmost Diagram Elements.Align Right [Ctrl+Alt+Right]
Align the Diagram Elements with the right side of the rightmost Diagram Element.Align Vertical Even
Vertically align the Diagram Elements with even spacing between the highest and lowest Diagram Elements.
Adjust Size¶
This adjusts the size to maximum width/height of the selected Diagram Elements.
Adjust Width
Adjust the width to the maximum width of the selected Diagram Element.Adjust Height
Adjust the height to the maximum height of the selected Diagram Elements.Adjust Size
Adjust the size of Diagram Elements by inputting the size or by selecting a particular Element.
View¶
[View] is used to set up and change the view of the Diagram Editor or the Structure Tree.
Zoom to Default [Ctrl+1]¶
Restore the default Zoom rate (100%) of the Diagram displayed in the Diagram Editor.
Zoom In [Ctrl+[]¶
Enlarge the Diagram displayed in the Diagram Editor.
Zoom Out [Ctrl+]]¶
Shrink the Diagram displayed in the Diagram Editor.
Fit to Window [Ctrl+0]¶
Make the whole diagram fit in the Diagram Editor.
Fit to Window Width¶
Adjust the width of the diagram to fit in the width of the Diagram Editor.
Fit to Window Height¶
Adjust the height of the diagram to fit in the height of the Diagram Editor.
Back to Previous Editor [Alt+Left]¶
Open the previous Diagram Editor.
Forward to Next Editor [Alt+Right]¶
Open the next Diagram Editor.
Show/Hide Project View¶
Show or hide the Tree and View in Project View.
Project View [Ctrl+Shift+P]¶
Show or hide the Project View.
Tool¶
The Tool Menu is used to perform operations on Diagrams and to set up the System Properties in [System Properties].
Export Image¶
Save Diagram as a graphic file. The name of the saved graphic file is used as the diagram or table name by default.
Save Diagram in PNG/JPEG/EMF/SVG Format
The diagram or table displayed in the Diagram Editor is saved in the selected format.Batch Save Diagrams in PNG/JPEG/EMF/SVG Format
The selected diagrams and tables are saved to the specified folder in the selected format.
Export All Tables to Excel¶
The tables in the project file are exported to an Excel file.
Customize HintWord¶
Customize the hintword. The hintword can be cloned and imported/exported.
System Properties¶
Set up the System Properties of STAMP Workbench .
Window¶
[Window] is used to organize the currently opened windows in Diagram Editor.
Close¶
Close the window that is currently edited.
Close Left Tabs¶
Close all windows in the left side of the currently edited window.
Close Right Tabs¶
Close all windows in the right side of the currently edited window.
Close Others¶
Close all windows except one that is the currently edited.
Close All¶
Close all windows.
Align Horizontally¶
Align all windows horizontally in Diagram Editor.
Align Vertically¶
Align all windows vertically in Diagram Editor.
Align Tile¶
Align all windows in square shapes horizontally and vertically.